Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Stabilizer bar slip (http://www.wranglerforum.com/f210/stabilizer-bar-slip-1014.html)

a1trimguy 01-28-2006 01:06 PM

Stabilizer bar slip
 
After installing a 4" lift,the stabilizer bar slides to the driver side constantly. I have replaced the bushings but that didn't help. it is putting so much pressure on the stabilizer bar link that the bolt scratched a groove in the frame please help

Vector6 01-28-2006 02:35 PM

you did relocate front your trac bar... correct?

a1trimguy 01-28-2006 11:24 PM

yes i relocated the track bar, and had the jeep aligned, i cant figure it out

Hunter9 01-29-2006 12:25 PM

You say you put a relocation bracket on, but how much net lift did you get from you kit? When looking at the front axle in relation to the frame is it centered or off center to the left (drivers side)? You may have to go to an adjusteable track bar to crrect the problem. You could also put come cheap hose clamps on the sway bar to keep it from shifting.


All times are GMT -5. The time now is 06:34 AM.