Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Tub "rail covers"?? (http://www.wranglerforum.com/f274/tub-rail-covers-102294.html)

monkers 07-12-2011 07:42 PM

Tub "rail covers"??
 
Does anyone make a "cover" for the tops of the tub that are exposed when the soft top is down? Maybe something like the mopar sill guards, they look like plastic diamond plate. Not sure if Im describing this so others can understand or not :facepalm:

JDsDream 07-12-2011 07:45 PM

1 Attachment(s)
I bought mine through Quadratec.
Attachment 57728

monkers 07-12-2011 08:11 PM

Ill check them out, thanks! Ive looked through that catalog a few times and have never seen them.......must be dreamin about winches and bumpers and lifts and...............thanks for the heads up

Leonidas 07-12-2011 08:14 PM

I have them on my TJ, Rugged ridge makes them. Word of advice, they go on with 2 sided tape, but I put two holes on either side and put the plastic automotive one way plugs to hold them on better

monkers 07-12-2011 08:37 PM

I looked in Quadratec but couldnt find any, maybe this weekend at the Pa Jeeps show I will, Ill check out RR also, thank you

rospan 07-12-2011 09:19 PM

My paint was scuffed from the hard top, so I used the Rustoleum spray on bedliner on my rails. Turned our great and was less than $8.00.

JDsDream 07-12-2011 09:27 PM

Quote:

Originally Posted by Leonidas (Post 1374655)
I have them on my TJ, Rugged ridge makes them. Word of advice, they go on with 2 sided tape, but I put two holes on either side and put the plastic automotive one way plugs to hold them on better

I've had mine on the Jeep for 5 years now and have had no problems with them raising. The tape has held really well and I have even accidentally hooked my sail panels under them a couple of times.

RevCo666 06-24-2013 04:57 PM

Gonna revive this thread abit: Using tub rail covers, would this cause any problems in relation to using factory hard and soft tops?

I just did a first time swap from hard to soft a few days ago. Today was my first day going topless and I found the edges of the tub kinda look naked/bare I guess. I understand I could easily put on a bedlined spray on but again does it hinder hard/soft top installations?


*** Sorry, didn't realize this was a JK thread where as I own a TJ :/ ***


All times are GMT -5. The time now is 08:46 AM.