Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   cruise control (http://www.wranglerforum.com/f282/cruise-control-104703.html)

Shelly 07-28-2011 03:39 PM

cruise control
 
How do I turn on my cruise control I'v never had a manual with it b4 and I can't just turn it on

Cheech66 07-29-2011 08:55 AM

mine is on the wheel left side, I turn it on then when I get to speed the set cruise control, button is on the same button just underneath it push that and I am good to go. Not sure what your set up is, hope this helps! If push come to shove go to the dealer and have them show ya.

Shelly 07-30-2011 08:48 PM

A man I've pushed it. But it sometimes it revs a little and ?????? Mmmmm thanks dose it need to be in 5 and just press the button??? dose a light go on or anything?? Aaaa

jp2611 07-30-2011 09:01 PM

Quote:

Originally Posted by Shelly (Post 1423833)
A man I've pushed it. But it sometimes it revs a little and ?????? Mmmmm thanks dose it need to be in 5 and just press the button??? dose a light go on or anything?? Aaaa

I have noticed that sometimes--I have to push and hold for like a half a second--not sure if it is the button clock spring or whatever. But a light does come on up on the dash to tell you it is ready for you to set the speed. (to set the speed use the bottom of same button) You can set it in any gear above 35mph.

scgeek12 07-31-2011 07:29 AM

it doesnt have to be in 5th, i use it in 4th all the time, just push the top of the button on the left side and you should get a green "cruise" on the dash, then push the bottom of the same button and it will set the cruise to that speed, if it revs up a little when you set the speed then turns off id look for a vacuum leak or could be a bad servo?

Shelly 11-25-2011 10:45 AM

Its the steering column something fried


All times are GMT -5. The time now is 04:13 PM.