Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   SYE Kit & Driveshaft Sale - Tattons Driveshafts Exclusively from JeepAddOns.com (http://www.wranglerforum.com/f123/sye-kit-and-driveshaft-sale-tattons-driveshafts-exclusively-from-jeepaddons-com-105244.html)

JeepAddOns-Chris 08-01-2011 09:18 AM

SYE Kit & Driveshaft Sale - Tattons Driveshafts Exclusively from JeepAddOns.com
 
3 Attachment(s)
We're now offering Rugged Ridge/Tatton SYE/Driveshaft Combo kits at THE absolute lowest price you'll find anywhere.

JeepAddOns.com was the first and original distributor to offer genuine Tatton's Driveshafts. Our experience with these driveshafts is second to none in the industry. Not only do we sell them, we also run them on our rigs.

INDIVIDUAL PRICING:

$175 with FREE shipping for the SYE Slip Yoke Eliminator.

$250 with FREE shipping for rear CV style driveshafts for CJ, YJ and TJ vehicles.


$150 with FREE shipping for front driveshafts for CJ and YJ Jeeps.

$250 with FREE shipping for front driveshafts for TJ's


$400 with FREE shipping for front or rear driveshafts for JK.

Front driveshafts are a must have for those that have converted from a vac disconnect system to TJ style or chromoly shafts on high pinion D30 axles. For example, on YJ's, your front driveshaft did not come from the factory balanced. Tatton's driveshafts are balanced to 100 MPH. They're also a huge upgrade in terms of strength for those with TJ's running factory balanced driveshafts. For the JK, the front driveshaft boot will tear once you put a lift on your ride, eventually causing driveshaft failure. Tatton's driveshafts eliminate this problem once and for all.

These driveshafts offer greasable Spicer u-joints, are full travel splines and are absolutely built to last. I am personally running this setup on my own personal rig. My SYE conversion kit is a Rugged Ridge and I'm running Tatton's front and rear. They have all taken a severe beating running 35's on my YJ and are none worse for the wear. I have been hung up pushing huge boulders underneath directly on my rear driveshaft and no bends, no breaks, nothing. I have 100% confidence when out on the trail when it comes to these. These driveshafts are also on the front and rear of our 2011 JK.


This is not available on the web and can only be ordered by calling in. Call me today at 800-388-8637 extension 1884!!!

psycho 08-01-2011 02:20 PM

WOW!! thats a good deal right there!

tailz 08-01-2011 04:30 PM

awesome price you guys ship to canada? Ive been planning to pick a sye and drive shaft up for the last little bit.

rpblanchette87 08-02-2011 08:46 AM

Is this offer still available today?
REALLY considering picking this up, as I have been looking into lifting the tj and i may as well be proactive in my approach.

JeepAddOns-Chris 08-03-2011 08:59 AM

Indeed it is a great sale. I don't think you'll find a better combo deal out there. :D

Offer is still available. :)

We do offer shipping to Canada. If you have an address stateside, it is much cheaper, but if you can get me your postal code, I can work up a shipping quote to you.

deuce 08-04-2011 06:05 PM

Since it's late I will most likely be calling you tomorrow. This is perfect timing since I got money for my birthday just to buy an sye.

rpblanchette87 08-07-2011 11:57 PM

quote shipped to 60914 for the SYE and rear CV.
if it matters. 01 TJ with a 4.0 auto. ^.^
just got paid friday, picking up a 4 inch lift from a clubmember. ready to jump on this deal.

JeepAddOns-Chris 08-08-2011 09:32 AM

The above prices include free shipping to anywhere in the lower 48. :) When you place the order, I will need to know what size lift you have, what year Jeep, what axle and if it's an auto or manual. No need to measure unless you've done a wheel base stretch. :cool:

rpblanchette87 08-08-2011 10:35 AM

sounds good. going to look at this lift tonight. will be calling you in the morning!
Thanks, Chris!

78j10 08-08-2011 06:38 PM

I have an SYE already just looking for a driveshaft. I have and 8.8 swap do i need to measure or od you have one that will fit.

Thanks

old_blue 08-08-2011 07:47 PM

you sir are gonna make me run out of money with all these deals :hide:

JeepAddOns-Chris 08-09-2011 04:19 PM

Quote:

Originally Posted by 78j10 (Post 1451608)
I have an SYE already just looking for a driveshaft. I have and 8.8 swap do i need to measure or od you have one that will fit.

Thanks

Got the same setup on mine. Got the measurements already, just give me a call and I'll get the driveshaft heading your way. :)



Quote:

Originally Posted by old_blue (Post 1451818)
you sir are gonna make me run out of money with all these deals :hide:

Look at it this way... You may Just Empty Every Pocket, but you can buy more stuff by buying it from me with the money you save on parts. :punk:

Got kits going out today to some lucky folks. Keep the orders coming. This is by FAR the best deal out there on a SYE/DS combo! :D

JeepAddOns-Chris 08-12-2011 11:18 AM

Friday bump. This is THE absolute lowest price on a SYE kit out there. and best of all FREE shipping!

I'm running this on my personal rig. I know the products inside and out and it works great on the street to get rid of vibes on daily drivers and it works even better on the trail when you're like me and beat the daylights out of your rig.

97wrangler-242 08-14-2011 09:59 PM

Would you need measurements if I wanted a mega short sye and plan on doing a ford 9" swap?

JeepAddOns-Chris 08-15-2011 10:55 AM

I believe that is an additional 3.5" shorter than a standard SYE, so I don't believe we'll need the measurement. Do you already have the mega short SYE or do you still need to order one?

00tj2 08-18-2011 11:19 AM

Ok, so here's my question. I currently am running a 2" spacer lift and I'm planning on a 4" skyjacker lift. If I order the see n shaft from you is there a difference between the lengths. If I get it for the 4" will it work on the 2" if I don't lift it right away? Btw, it's not if it's when I order it from you guys...

00tj2 08-18-2011 11:22 AM

Also, do u sell the super short sye? If so how much would that be with the matching driveshaft? Thanks

97wrangler-242 08-18-2011 11:42 AM

Quote:

Originally Posted by JeepAddOns-Chris
I believe that is an additional 3.5" shorter than a standard SYE, so I don't believe we'll need the measurement. Do you already have the mega short SYE or do you still need to order one?

I don't have it yet. I plan on picking it up when my ford 9" parts start rolling in

JeepAddOns-Chris 08-18-2011 11:48 AM

The difference in shaft length needed between a four inch lift and six is not enough to require use of a whole new shaft. One built for a four inch lift can safely be used for a six. The driveshaft will be the same price regardless of length as long as we're using the 1310 u-joints.

Would you want to the super short one with or without the speed sensor?

00tj2 08-18-2011 01:03 PM

Not sure if that question was for me but if it was yes to the super short with speed sensor. Just want to know the price difference and how much more shaft length I will gain.

JeepAddOns-Chris 08-18-2011 03:16 PM

Shooting you a PM on this one.

94impactyj 08-19-2011 05:18 AM

what about a front shaft for a yj that just got an aussie locker and needs a new shaft?

JeepAddOns-Chris 08-22-2011 09:17 AM

Can do that for you as well. I'm running a Tatton's front shaft on mine too. $150 delivered to your door. :)

mrobison1 08-22-2011 06:15 PM

Have a 92 YJ with a 4 inch lift and would like a front and rear drive shaft. I have the d30 and d35 and I just found the answer to my own question lol NVM. Hopefully I will be placing my order with you guys soon..

JeepAddOns-Chris 08-24-2011 02:20 PM

Just give me a call and we'll get them out to you.

Hoosierbird 08-29-2011 08:55 AM

Just ordered my kit........thanks Chris. :dance:

JeepAddOns-Chris 09-20-2011 04:58 PM

Several more shafts were shipped out today and yesterday. A couple of new orders in today. Be sure to get in on this deal soon. SYE Combo pricing will only be available through the end of September!

Clint343 09-20-2011 05:07 PM

Anything for a JK?

JeepAddOns-Chris 09-21-2011 09:13 AM

Quote:

Originally Posted by Clint343 (Post 1587535)
Anything for a JK?

Yes sir! Actually, the JK front shafts are one of our biggest sellers. A lot of JK owners experience problems with the front shafts once they do a lift.

Can do the 1310 or 1350 (1350 ones are a bit more expensive). They're $395 for front and rear. It includes the new shaft, yokes and bolt kit.

00tj2 09-22-2011 04:46 PM

Chrisssssssss.... Tried calling u today and left a message. Call me back when u can so I can order my parts. Thanks buddy....


All times are GMT -5. The time now is 08:05 PM.