Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   4.2 carb intake stud size (http://www.wranglerforum.com/f218/4-2-carb-intake-stud-size-107079.html)

copohawk 08-11-2011 09:24 PM

4.2 carb intake stud size
 
Hello.

This is on my 1990 Wrangler with 4.2L. I am swapping to the Motorcraft 2100 carb...and I bought a whole swap kit from ebay seller.

There is a spacer/adaptor with allen head bolts that bolt into the existing carb stud bolt holes on the intake manifold...but they don't want to go in easily.

I am going to use a tap to clean up the threads...but when I search, I can't find the size of the threads. It looks to be a coarse 5/16 (18) thread. I took one of the new bolts to the hardware store and matched it to a nut of that thread pitch.

Can someone please confirm the size for me?

Thanks.

copohawk 08-13-2011 11:55 AM

No one has any answer to this?

Can someone point me in the right direction where to find the info? The search didn't work...

Missouri Bound 08-19-2011 09:39 PM

Taking the bolt to the hardware store is exactly what I would have done. And they are indeed 5/16 (18) thread. I just did a Weber swap about 3 weeks ago and they are supplied with the kit.

copohawk 08-20-2011 09:17 AM

I appreciate the response....the threads in the intake were messed up enough that I wasn't sure. I got confirmation from another source...then used the 5/16 (18) tap to clean up the threads for the swap.

Missouri Bound 08-21-2011 09:40 AM

:thumb: good luck on that and future projects.


All times are GMT -5. The time now is 08:36 PM.