Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Builders Corner (http://www.wranglerforum.com/f118/)
-   -   dana 44s (http://www.wranglerforum.com/f118/dana-44s-108202.html)

Mikeylala 08-18-2011 07:04 PM

dana 44s
 
would dana44s from a rubicon fit on a 95 wrangler? is the width the same?

Creepy Crawler 08-18-2011 07:05 PM

Don't think so because of the leaf springs.

Irongrave 08-19-2011 06:58 AM

They are the same width but you'll need to fab either leaf mounts on the 44s for link mounts on the YJ to make them work. If it were me I'd run long arms and coil overs

4Jeepn 08-19-2011 07:02 AM

depending what year they are off of you might need new rims as well. TJ's model years not problem, JK model years, new rims.

cavediverjc 08-19-2011 09:06 AM

You can make anything fit, it'll just depend on how much fab work you're willing to do...

JK D44s are better built than TJ D44s, from what I've read. I say go for it. It can't take too much fab work to remove the JK suspension mounts and weld on spring perches for your leaves. You will have to get new wheels though, as JKs have a different bolt pattern than YJs/TJs.


All times are GMT -5. The time now is 12:09 AM.