Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Making a Universal Winch plate mount fit? (http://www.wranglerforum.com/f282/making-a-universal-winch-plate-mount-fit-108905.html)

Moroney167 08-22-2011 08:23 PM

Making a Universal Winch plate mount fit?
 
Been running around trying to get my new winch mounted up to my Smittybuilt SRC bumper. Was planning on building it to fit with some 1/4" steel I could get from a friend but figure its a lot easier to jut get a winch plate and space up the rear a 1/4" when mounting. A friend has a universal winch mount from Mile Marker. I held up to front of Jeep and no holes at all match up. I am sure I could just drill a few to help it all line up but IDK. Is it worth it or just find a piece of steel and weld to my bumpers edge and then bolt in the back so the winch fits perfect and probably a cleaner finish result..

Ideas? Anyone have pictures of how they mounted up with a big bumper?


All times are GMT -5. The time now is 07:08 PM.