Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   Synergy Suspension Jeep JK Complete Rear Axle Weld-On Bracket Kit (http://www.wranglerforum.com/f123/synergy-suspension-jeep-jk-complete-rear-axle-weld-on-bracket-kit-109812.html)

EAD Offroad 08-28-2011 11:58 AM

Synergy Suspension Jeep JK Complete Rear Axle Weld-On Bracket Kit
 
Another nice kit from the folks at Synergy Suspension!


Synergy Suspension Jeep JK Complete Rear Axle Bracket Kit.

Included components:
  • Synergy Suspension Jeep JK Weld-On Rear Track Bar Bracket - (PPM-8072-01)
    • Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
    • Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
    • Multiple Track-bar holes for suspension adjustments*
    • Designed to fit stock JK axle tubes, 3.150" diameter
    • Will fit other diameter axle tubes with minor trimming
  • Synergy Suspension Jeep JK Rear Weld-On Bump Stop Bracket - (PPM-8072-02)
    • Weld-On bracket designed to utilize JK style bump stop spacers and retain factory emergency brake cables
    • Great for swapping any axle into a JK
    • Designed to fit stock JK axle tubes, 3.150" diameter
    • Will fit other diameter axle tubes with minor trimming
  • Synergy Suspension Jeep JK Weld-on Rear Upper Control Arm Bracket - (PPM-8072-03)
    • Weld-On bracket designed to mimic factory JK upper control arm bracket on any axle
    • Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
    • Designed to fit stock JK axle tubes, 3.150" diameter
    • Will fit other diameter axle tubes with minor trimming
  • Synergy Suspension Jeep JK Weld On Rear Lower Control Arm Axle Bracket Kit - (PPM-8072-04)
    • Replace bent and broken stock RLCA brackets or use to swap in an entirely different axle.
    • CNC laser cut and bent out of high strength 3/16" steel
    • Designed to fit stock JK axles (3.150" axle tube diameter) but can be trimmed to fit other axle tube sizes from 3.0" to 3.25"
  • Synergy Suspension Jeep JK Rear Axle Spring Pad - (PPM-8098)
    • They feature a coil retainer which keeps the coil from popping off the lower spring pad during extreme articulation
    • Designed to fit stock JK rear housings (3 1/8" axle diameter)




All times are GMT -5. The time now is 10:08 PM.