I mounted 31x10.50's on my stock 95 aluminum rims and they rub when turning. I am going to buy some Cragar black rims and need to know what back spacing I need so my tires will not rub when turning. Also, what is the stock back spacing. I not not want to use spacers. Thanks for the help!
09-15-2011 09:12 AM
Any body got an answer? I went to Discount tire and they said a 32mm offset from factory would work. But I do not know the stock measurements. I want to make sure the 32mm ( 1.25 inches ) will prevent the tires from rubbing or if I should go with more than the 32mm. Thanks.
09-15-2011 09:46 AM
Stock backspacing should 5.5 inches
09-15-2011 10:28 AM
A 4 inch back spaceing should give u plenty of room