Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Bypass Vacuum Lines on a YJ Help?! (http://www.wranglerforum.com/f218/bypass-vacuum-lines-on-a-yj-help-112086.html)

BlackedOutYJ 09-09-2011 11:54 PM

Bypass Vacuum Lines on a YJ Help?!
 
I'm curios to see how you would go about bypassing the vacuum set up on a yj. I'm installing my 8.8 hopefully end of the month then it's to a locker for the Dana 30. Would like to go to a cable set up rather than having to count on the vacuum lines. Thanks for any guidance or assistance in advance.

BlackedOutYJ 09-10-2011 07:45 PM

Anybody?

themadhatter 09-11-2011 05:15 PM

there isn't anything difficult about bypassing the front axle actuator. you can work up a home brew setup or you can buy a posi-lok which any novice can install. when you're done, just install a plug into the port that runs to the source of your vacuum line. The posi-lok setup installs in about 2 hours while on your back and that is if you're taking your time...it really is that easy.

google or searching this forum will net you results on how to make your own posi-lok style actuator with a manual choke cable.


...and yes this is my first post. :D

BlackedOutYJ 09-11-2011 07:06 PM

Quote:

Originally Posted by themadhatter
there isn't anything difficult about bypassing the front axle actuator. you can work up a home brew setup or you can buy a posi-lok which any novice can install. when you're done, just install a plug into the port that runs to the source of your vacuum line. The posi-lok setup installs in about 2 hours while on your back and that is if you're taking your time...it really is that easy.

google or searching this forum will net you results on how to make your own posi-lok style actuator with a manual choke cable.

...and yes this is my first post. :D

Well Ty for tour first post and response. Ive seen a few but yet to find a step by step as this would be my first time for something like this.


All times are GMT -5. The time now is 01:18 AM.