- - Soft top Help!
09-10-2011 12:29 PM
Soft top Help!
Hey guys i got a new soft top and i really like it but when i put the windows on the weather stripping gets in the way and it closes but it doesnt look flush. any advice? theres also these little strips of extra weather stripping hanging down the sides. will put pics up
09-10-2011 10:52 PM
What brand is that? I have had a bestop and it had adjustments on the pins that sit in the door, which helped with fit. Also, that door skin looks deftective. I would see about having it replaced under warranty.
09-11-2011 02:32 PM
its smittybilt and ill look into it thanks
09-11-2011 05:52 PM
My Smitty (New 7 months ago) isn't quite as bad, but close. I push on the top-rear of the soft-door to close it, and it's better :) I've tried removing and adjusting the door skins, but it's just junk IMO.
BTW, my rear window came 'un-welded' at the bottom, and the factory had no advice... nothing! I stitched it myself.
09-11-2011 06:32 PM
My Smitty fits the same way too and the zipper broke on the back window within 2 months. Cheap junk!
09-12-2011 12:09 AM
i think i might be able to fix it i think i just need to pull it down a little more and it will be good
09-12-2011 07:43 AM
It wont change much, I have smittybilt uppers on a pavement ends top and looks the exact same way except for the top part, mine fits a tad bit better at the top. The Pavement ends uppers fit fine but the zippers gave out after 4.5 years. Smittybilt crap does not fit right at all.
09-12-2011 10:10 AM
the rubber at the door goes down on the door so it will sseal to the door.