Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Communications and Electronics (http://www.wranglerforum.com/f40/)
-   -   Need some help (http://www.wranglerforum.com/f40/need-some-help-113650.html)

JSM1434 09-19-2011 08:15 PM

Need some help
 
I have 2 Rockford Fosgate P1 10" 4 ohm subs and a pioneer KAC-X201T amp. I had the subs running in 2 channel off of the amp but just bought an MTX Thunderform enclosure which wires the subs internally, parallel, with just one input. If I bridge that amp and hook it up to those subs, which are now wired parallel, I'm going to fry that amp, right? I bought the subs, amp and original enclosure off of craigslist for cheap but I'm wondering if I am going to just have to pay to redo everything now. :banghead:

Any suggestions would be greatly appreciated!

Jma20a 09-20-2011 12:26 PM

are the subs single voice coils or double voice coils. if they are svc than they would present a 1ohm load when wired in parallel. you can also add a second terminal to the enclosure.

JSM1434 09-21-2011 07:26 AM

I'm actually not sure but I'll check. I was wondering if I would be better off to just replace the amp with a single channel, maybe?


All times are GMT -5. The time now is 12:51 AM.