I just ordered the teraflex high steer kit with the passenger side knuckle and 1 ton draglink and tie rod. I was just thinking about the angles of the trac bar and the drag link cuase the draglink is gonna be moved up and angle will be very different. Ive seen a couple brackets that move the trac bar up but only in kits, can i buy the bracket alone? or will the high steer kit work with my trac bar? I have the rubicon express extreme duty trac bar with the heavy duty drop frame mount.
09-12-2007 04:07 PM
It's going to cause you problems. If I remember rightly even the Teraflex instructions that come with the knuckle and the new steering mention that you will need to alter your trac bar angle. I personally have never seen a separate bracket that does this on it's own as you mentioned "Outside of a separate kit". I would assume they are out there just never had to look myself.