Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Accessory and Push Button start on 1999 tj...HELP (

bgrandtj 09-22-2011 12:29 PM

Accessory and Push Button start on 1999 tj...HELP
1 Attachment(s)
I would like to know which connector and which wires I need to tap into in order to have 1 spot for accessory and the other a momentary start switch. I would like pictures,please. I have already installed a kill switch on connector 106 'pin #4- Would iot be the same wire?
I would ultimately like to forget about the key altogether ..:confused:

bgrandtj 09-26-2011 02:07 PM

Before I go hacking into to any wires, could somebody point out in a photo, which connector,PLEASE ?/! Which circuit? I can fix your Windows OS or build you a PC , but I don't know a heck of a lot about auto electricity and don't wanna find myself with unwanted repairs. I've had searched all of the posts and they give brief descriptions of a red wire and yellow wire coming from the ignition switch. Found 1 circuit , looked at the wiring diagram from Haynes Manual - Just can't put the 2 together from paper to REALITY.
1999Jeep Wrangler Sport/5 speed


bgrandtj 10-10-2011 01:49 PM

:whistling: Anybody ????

Jersey Sahara 10-10-2011 01:56 PM

Are you trying to make a keyless start or even if not. Look on bulldog securities website. They have wiring charts for almost all vehicles and it should give you the wires you need

TheTJRod 10-10-2011 10:44 PM

here is a good place to go for car wiring help

Car Alarm, Car Stereo, Mobile Video, and Cruise Control Info for Installers

here is a link to the wiring diagram. You want the red and the yellow, touch them and your jeep will start. As long as your key isn't gray(means you have a key transponder)

All times are GMT -5. The time now is 04:46 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.