Jeep Wrangler Forum

Jeep Wrangler Forum (
-   Builders Corner (
-   -   posi lok questions (

Mallia420 10-09-2011 07:20 PM

posi lok questions
Couple of questions about getting rid of vacum engaged 4wd. 1990 yj
1 whats the damage that can be done if i leave stock tcase in 4hi or 4lo and have front axle disengaged. Specialy in low.
2 do they have tcases with just hi/lo modes so i only have 2 selections instead of 3 (making 2hi and 4hi the same with posi lok system and stock tcase?

Bs13855 10-10-2011 09:45 PM

I just opened up my vacuum part of my axle and put washers in it to keep is locked all the time. So I don't have to worry about the crappy vacuum system. I drive my jeep on the road as a daily driver andtake it offloading no problems at all.

wreck999 10-15-2011 11:32 AM

i did the same thing as bs13855,popped the actuator cover open and shimmed it with washers. works great !

All times are GMT -5. The time now is 04:23 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.