Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Removing grill (http://www.wranglerforum.com/f282/removing-grill-11868.html)

activelydying 09-27-2007 12:57 PM

Removing grill
 
I was trying yesterday to remove my grill to insert the wire mesh bhind it like mentioned in the JK thread. I got all the bolts off and the radiator removed but I still have a problem. There are AC lines the run through the panel right in front of the raditor. I can not remove the grill because of these lines. I also can't remove the panel. Any ideas.

1BLKJP 09-27-2007 03:19 PM

So if you have the shroud off and the radiator out, why can't you just do your cool guy mesh inserts with the grill still in the rig? Should be plenty of room. If not just pop the fan off also.

activelydying 09-28-2007 04:47 PM

I can't get to the inside of the grill because of the panel that the AC lines run through.

lost 09-28-2007 06:13 PM

Quote:

Originally Posted by activelydying (Post 142515)
I can't get to the inside of the grill because of the panel that the AC lines run through.

unbolt the shroud, unbolt and remove the radiator, unbolt the a/c condensor but do NOT undo any of the hoses on the condensor, tilt the "driver-side" of the condensor towards the motor just enough so that you can get whatever you need through. thats what I did to install my electric fan (click for picture) which was about 4" thick

activelydying 09-29-2007 06:51 AM

Thanks lost. I'll give it a try today.

Tj Bunch 09-29-2007 11:07 AM

Lost I was expecting a picture of the install, Not climbing a hill.....Looks good though.

Greg

lost 09-29-2007 11:14 AM

Quote:

Originally Posted by Tj Bunch (Post 142743)
Lost I was expecting a picture of the install, Not climbing a hill.....Looks good though.

Greg

its the best picture i have showing the location of the fan :D
and thanks!


All times are GMT -5. The time now is 01:41 PM.