I just bought a 95 yesterday. The body on it is in pretty good shape with 2 exceptions.
The very front of the fender on the passenger side is pushed back. The prior owner tried to bondo and paint over it without a lot of success. Looking online it seems that I can pick up fenders to replace it, but looking at the fender on my Jeep it seems that the very front section that is bent/rusted can be removed without having to replace the entire fender.
Can someone verify if I must change out the entire fender, or do I need to switch out just the front section that is bent?
This looks to be my first weekend project coming up.
Thanks in advance for any advice.
10-24-2011 08:53 PM
I think its all one section, Can you post some pic's?
10-24-2011 09:05 PM
On my 95 the front fender is two pieces but I have yet to find the small piece on the front alone, really have not looked though either.
10-25-2011 04:19 AM
You will never find one. Just get a new fender
10-25-2011 08:00 AM
10-25-2011 05:08 PM
Its not 2 peices if u take off the fender 7 look closely it is one at the front of the frnde is not from 2 peices but it self folded 2 meet & spot welded. So u can only get it as a whole fender. I had to replace mine.
10-25-2011 05:11 PM
You can cut the spots out and replace the nose if you can find one off another fender. Even rusty fenders don't rust on that front part.....try craigslist
10-25-2011 08:00 PM
I had 2 replace the whole thing it looked more like bacon then a fender
10-25-2011 08:34 PM
i just trashed mine and replaced them with a full replacement metal cloak inner and outer fender. mine were more then a little dented and staring to rust bad