Has anyone had a problem with the body lift pucks breaking through the floor. The PO had a 3 inch body lift and was issing one of the pucks above the rear axle. I think this made it unstable and the rear mounts broke through the floor. There is no rust on this jeep that I can find but now I am stuck with trying to figure out just what to do about not having the rear mounts. I have since removed the body lift and am going a different route to fit the 35's. Thanks in advance for your help.
11-03-2011 11:18 AM
Had the same thing happen to my first yj. Po put it on to clear 31's. I was rather rough on it and it didn't take long to send 3 mounts through the floor.
11-03-2011 11:32 AM
What did you end up doing to fix it or did you just get rid of it?
11-03-2011 10:25 PM
The only way to "properly " repair it is to cut a hole in the floor above each mount that needs to be fixed. Then cut out the old mounts out repair all the metal and weld another nut to bolt to then weld the floors back up.