Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Winch Plate help (http://www.wranglerforum.com/f282/winch-plate-help-123050.html)

IWANNAOFFROAD 11-16-2011 04:40 PM

Winch Plate help
 
Im geting an 8000 pound winch for my stock jeep Wrangler. Im wanna put the winch on my stock bumper, what kind of winch plates do I need?

kfdjason7620 11-16-2011 04:51 PM

http://www.quadratec.com/products/92122_1101_07.htm try this

IWANNAOFFROAD 11-17-2011 09:00 AM

Perfect that was what I was looking for, do you know if I have to get a smitty built wench to fit the wench plate??

kfdjason7620 11-17-2011 09:29 AM

Naaaa any in the 8k range or under will bolt up, but drilling 4 holes in it is easy if it doesn't bolt up right

2003x 11-17-2011 04:40 PM

I have the Rough Country winch mounting plate, looks like the smittybilt one. It will bolt up to any winch.
http://www.roughcountry.com/winch_mounts_jeep.html

TnDz TJ 11-17-2011 05:17 PM

Chris Holland from jeepaddons.com sells flat style winch plates for TJ's for $49. Get his number off the first post in vendor spotlight forum under the ENGO WINCH thread.


All times are GMT -5. The time now is 06:27 PM.