adjusting clutch pedal on a '92 wranlger
I just had a buddy replace the clutch on my '92 wrangler. The clutch is engaging at the very end of the pedal (it was doing this before). And I'm trying to figure out how to adjust the clutch so it engages higher up into the pedal. Any help is greatly appreciated
Have to make sure you bleed it. Also check and make sure the clutch pedal assembly isn't broken. It can break and twist out of place causing a high pedal.
|All times are GMT -5. The time now is 06:45 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.