Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   $6.32 Revised Part you should replace (http://www.wranglerforum.com/f274/6-32-revised-part-you-should-replace-127249.html)

Highlands JK 12-12-2011 01:33 PM

$6.32 Revised Part you should replace
 
Hi all : I just wanted to share this information ...
I was detailing the Jeep and the front fender was loose upper aft area, they have at least on 2010 models , plastic nuts qty 1 each side.
So I checked missing 1, and 1 was about to fall off.
I went to the Dealer and low and behold they up graded to steel ,I got 2 the part # is 1-06509889AA NUT $6.32 ea.( It looks like a bolt without threads ,threads are on the inside )
I just though I would pass this on ,as these plastic ones strip or just plane fall off.. nothing worse than a raddle on a new vehicle...
Merry Christmas and Happy New Year to all

kjeeper10 12-12-2011 01:44 PM

Quote:

Originally Posted by Highlands JK
Hi all : I just wanted to share this information ...
I was detailing the Jeep and the front fender was loose upper aft area, they have at least on 2010 models , plastic nuts qty 1 each side.
So I checked missing 1, and 1 was about to fall off.
I went to the Dealer and low and behold they up graded to steel ,I got 2 the part # is 1-06509889AA NUT $6.32 ea.( It looks like a bolt without threads ,threads are on the inside )
I just though I would pass this on ,as these plastic ones strip or just plane fall off.. nothing worse than a raddle on a new vehicle...
Merry Christmas and Happy New Year to all

Take a pic if you could :thumb:

I just fixed a knock adding washers to a
Fender bolt. Same one?

3JKs1H1 12-12-2011 01:45 PM

Planes and raddle. I hate flyin.

Tammy 12-12-2011 01:47 PM

Thanks for sharing. I got my jeep last december and noticed it right off too. Ive got mine replaced for no charge so maybe some others will get that lucky too.
Merry Christmas
Tammy

nvkid 12-12-2011 04:07 PM

Quote:

Originally Posted by kjeeper10 (Post 1821778)
Take a pic if you could :thumb:

I just fixed a knock adding washers to a
Fender bolt. Same one?

:popcorn:

kjeeper10 12-12-2011 04:32 PM

Quote:

Originally Posted by nvkid
:popcorn:

And your problem is?

kbwwolf 12-12-2011 04:40 PM

Probably just hungry. Snack time about now...:D

kjeeper10 12-12-2011 04:41 PM

Quote:

Originally Posted by kbwwolf
Probably just hungry. Snack time about now...:D

Good thing I am out

Kelsey73 12-12-2011 05:05 PM

I gotta see a pic. Mine are rattling and I've been to lazy to go figure out what's loose

jk'n 12-12-2011 05:10 PM

:popcorn:

I interpret this as I'm waiting too so......

:popcorn:

Cv2065 12-12-2011 05:17 PM

Mine sounds more like a dull thud only on the drivers side. Almost sounds like its in the middle of the two doors inside somewhere. I have no clue, but I'll take a look. :surrender:

I did however correct my front track bar today. Now I'm only off 3/16". I think I'm happy with that.

kjeeper10 12-12-2011 05:48 PM

Quote:

Originally Posted by Cv2065
Mine sounds more like a dull thud only on the drivers side. Almost sounds like its in the middle of the two doors inside somewhere. I have no clue, but I'll take a look. :surrender:

I did however correct my front track bar today. Now I'm only off 3/16". I think I'm happy with that.

Similar...... And while we are at it :popcorn:

DALTONSJK 12-12-2011 05:53 PM

Ok I know I probably should not ask this but..... What the hell does popcorn..... Mean..

kjeeper10 12-12-2011 05:56 PM

Quote:

Originally Posted by DALTONSJK
Ok I know I probably should not ask this but..... What the hell does popcorn..... Mean..

:rofl:

Great White North 12-12-2011 06:23 PM

:popcorn:

Quote:

Originally Posted by DALTONSJK (Post 1822334)
Ok I know I probably should not ask this but..... What the hell does popcorn..... Mean..


nvkid 12-12-2011 06:24 PM

Quote:

Originally Posted by kjeeper10 (Post 1822156)
And your problem is?

Ditto on the pic. :popcorn: popcorn doesn`t give me gas

kjeeper10 12-12-2011 06:31 PM

I want to see this darn nut right now!!!!

Op come back :D

jk'n 12-12-2011 06:32 PM

Quote:

Originally Posted by nvkid (Post 1822394)
Ditto on the pic. :popcorn: popcorn doesn`t give me gas

:rofl:

kbwwolf 12-12-2011 06:32 PM

Quote:

Originally Posted by DALTONSJK (Post 1822334)
Ok I know I probably should not ask this but..... What the hell does popcorn..... Mean..

kjeeper's a veteran popcorn eater. Anytime there's a developing situation (usually antagonistic) he'll be one of the first ones there, popcorn in hand.

Basically it just signifies that the poster is finding the current thread, or recent posts, amusing in some way.

Your question about the popcorn is the current case-in-point. Looks like that one sold a few bags. :D

Terex 12-12-2011 06:35 PM

Where is the beer mug Smiley? The popcorn made me thirsty.

nvkid 12-12-2011 07:01 PM

Quote:

Originally Posted by kjeeper10 (Post 1822414)
I want to see this darn nut right now!!!!

Op come back :D

:popcorn:

kik 12-12-2011 07:02 PM

Good info. Thanks.

kjeeper10 12-12-2011 07:10 PM

Deez nuts

Not doze nuts :facepalm:

kbwwolf 12-12-2011 07:13 PM

Quote:

Originally Posted by kjeeper10 (Post 1822506)
Deez nuts

Not doze nuts :facepalm:

Those aren't nuts, that's Uranus (Tony Kornheiser joke).

kjeeper10 12-12-2011 07:18 PM

That's a dirty dog ballon knot ..... Yeuk!!

DALTONSJK 12-12-2011 07:19 PM

Lol... Thanks.. I new better but what the hell made u all lol.. Thanks

nvkid 12-12-2011 08:00 PM

Quote:

Originally Posted by nvkid (Post 1822486)
:popcorn:

Can you see santa ??

DALTONSJK 12-12-2011 08:59 PM

Drop it

SeaComms 12-13-2011 07:26 AM

Are you talking about the inner guard and bolt that goes straight up? If so, there was a TSB to replace these with a steel bolt as the plastic ones were falling out. I think it was a 2010 only issue? I though I had a pic but cant find it and am 7 hours away from home at the moment...

Highlands JK 12-13-2011 08:01 AM

Quote:

Originally Posted by SeaComms (Post 1823995)
Are you talking about the inner guard and bolt that goes straight up? If so, there was a TSB to replace these with a steel bolt as the plastic ones were falling out. I think it was a 2010 only issue? I though I had a pic but cant find it and am 7 hours away from home at the moment...


Yes that is the NUT .... I would get a picture ,but my wife works til after dark ,so that won't work ....
Should of checked into TSB first ,but 13.00 $ ,not to bad ...I ordered the bike rack when I was there ...Got it for less than E Bay price..


I had all my door seals and rear window seals replaced on a TSB
The passenger A piller was leaking ,replaced both driver ,passenger and rear window door seal's ....So if your JK leaks and under warranty ,go see your dealer ...
Happy Motoring


All times are GMT -5. The time now is 05:59 PM.