Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   3" body Lift Removal Help. (

Marty97TJ 11-05-2007 09:40 AM

3" body Lift Removal Help.
Hey Everyone, I just got this 97 Jeep with a 3" body lift. It already has a 4" suspension lift with 36" Super Swamper TSL Radials. I would love to remove this ugly 3" body lift but I don`t no whats involved or what kit to replace it with. It looks like just the pucks have to be removed but I`m not sure about the engine area.I`m thinking about going with 33" or maybe 35" so I don`t need much of a body lift or a body lift at all. Any Suggestions..Thanks

tazmann910 11-05-2007 12:12 PM

Remove the body lift and replace it with a 1" body lift. One of the things to look at when lowering the body is your gas tank filler hose, I am sure they put a longer hose on when they put the 3 inch lift on. Hope that helps a little.

mrbigjeep 11-05-2007 12:14 PM

it will also have drop down brackets either on the radiator or the fan shroud...but the 1" BL will come with the 4 new drop down brackets for the fan shroud

i have also heard something about steering column and shifter extension...of course you may be able to leave the shifter extension in if it has one...the shifter will just be a bit long.

jeeperx2 11-05-2007 12:43 PM

My 2" had a block installed at steering shaft/column , gas tank filler hose and vent hose extensions and transfer case shifter extension mine is an auto so i needed nothing else for shifter , fan shroud drop brackets

All times are GMT -5. The time now is 08:39 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.