Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Texas Jeep Forum (http://www.wranglerforum.com/f53/)
-   -   Looking for fellow jeepers in the panhandle (http://www.wranglerforum.com/f53/looking-for-fellow-jeepers-in-the-panhandle-130042.html)

drew11 12-29-2011 12:04 AM

Looking for fellow jeepers in the panhandle
 
1 Attachment(s)
Just finishing my build on a '94 yj. I was looking to help out and wheel with some other jeepers in the panhandle. I'm no expert, but pretty handy in the shop. My yj has gone from stock 2.5L4 banger to 355CI SBC with 700R turbo 400, NP 205 TC, 3/4ton axles. Just seeing if there is some other people with the same interests. ThanksAttachment 86137

carpediem 12-29-2011 02:26 PM

Im in the amarillo area, if you know where Fritch is that would be my village lol....what part of the panhandle are you in?

CrazyBull 12-29-2011 02:32 PM

SUHWeeeeet! From Floydada myself.

drew11 12-30-2011 07:10 AM

Thats a sweet Rubi. We're considering trading an 07 tahoe for one. We have been looking at them for awhile. Are you in floydada or utah now? I've got some buds in utah also, around the Logan area.

BAM-BAM92jeepYJ 01-25-2013 08:05 PM

what kind of fabricating did you have to do for the np 205? most np 205s I have seen are for the passenger side where the shifter arm comes up. I wanna do a 350 sbc/sm 465/np 205 swp in my 92 jeep this spring.

drew11 02-18-2013 06:41 AM

Sorry, Bam-Bam I just saw your post. My jeep was a 5 spd, so when I pulled the plate from the hump, the opening was large. After my install , I just measured and cut a piece of sheet metal for the opening and rolled it to fit the hump. Its not difficult,but its a hit or miss thing just keep trimming till everything clears. I then found a shifter boot on ebay. Mounted everything. I did silicone the replacement sheet metal cover. After bedlining the interior, it looks factory. Hope this answers your question. Hardest part was coming up with my support crossmember design. I incorporated the support into the stock skid plate.

TomStev 02-21-2013 12:13 AM

Texas thread for general chat and locking back.
http://www.wranglerforum.com/f6/texa...rs-220699.html

amarillojeepguy 04-12-2013 01:14 AM

From Amarillo....when where do y'all go wheeling h...heard Crawford ranch closed down

drew11 04-14-2013 08:02 AM

Rosita, on the canadian river mainly east of the bridge, but a bunch went out yesterday and they went west of the bridge. Its north of Amarillo on 287, if you didnt already know. We are looking into different options for next outings. Sayre OK has a nice ORV place and its about 90 mi. We have a trip planned for Aug to go to Red River, NM for a long weekend of wheeling. We try to wheel once a month during the summer and have jeep work days at least once a month during the winter. Your more than welcome to join us as we are the unclub. Get on face book and look for Panhandle Jeep coalition.


All times are GMT -5. The time now is 02:16 PM.