Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   RealWheels, Pre Runner Bar installed (http://www.wranglerforum.com/f274/realwheels-pre-runner-bar-installed-131970.html)

fdnc2774 01-08-2012 02:08 PM

RealWheels, Pre Runner Bar installed
 
Just installed the light bar with 130w kc slimlights. . . didnt want to spend a bunch on an aftermarket bumper but i think this achieved what i wanted. . stubby bumper conversion next???? :punk:

fdnc2774 01-08-2012 02:10 PM

Pics

fdnc2774 01-08-2012 02:17 PM

5 Attachment(s)
having trouble gettin pics to post. .

basecamper 01-08-2012 03:43 PM

Great looking Jeep!! :thumb:

arctic318 01-08-2012 06:24 PM

who makes the light bar? Also, brand and series are your tires? Like them both, nice job. Interested to see how it looks when you do the stubby conversion.

fdnc2774 01-09-2012 09:08 AM

Real Wheels Makes the bar. . got it from quadratec. . and i got 33" nitto mud grapplers on dale jr. chrome. . i think it makes a nice set up. . gonna do the stubby next week. . i will post pics

strider_mt2k 01-09-2012 09:54 AM

Quote:

Originally Posted by fdnc2774 (Post 1903299)
Real Wheels Makes the bar. . got it from quadratec. . and i got 33" nitto mud grapplers on dale jr. chrome. . i think it makes a nice set up. . gonna do the stubby next week. . i will post pics

I was just thinking how that setup would look really good stubby-ed up! :thumb:

I think that's where I'm headed as well with mine, too.

Beautiful Jeep!

Mr. Sinister 01-09-2012 10:10 AM

Nice, I've got the same one!!

https://fbcdn-sphotos-a.akamaihd.net...64457380_n.jpg

golfpunks 01-09-2012 11:13 AM

I like the front wind deflector on the hood.. Where did u get it??

fdnc2774 01-10-2012 07:07 AM

Quote:

Originally Posted by golfpunks (Post 1903592)
I like the front wind deflector on the hood.. Where did u get it??

http://www.amazon.com/Rugged-Ridge-1.../dp/B004YLKK5Q

its simple/no drill install. . this is best price on net too

fdnc2774 01-10-2012 07:09 AM

Quote:

Originally Posted by Mr. Sinister (Post 1903437)

nice. . did you drill into yours to hide the wires. . i did. . wasn't to impressed with having to hide wires by zip tie. so i drilled 4 holes. . 2 next to mount and 2 at bottom. . then used black silicone to seal them up

fdnc2774 01-10-2012 07:09 AM

Quote:

Originally Posted by strider_mt2k (Post 1903402)
I was just thinking how that setup would look really good stubby-ed up! :thumb:

I think that's where I'm headed as well with mine, too.

Beautiful Jeep!

thanks man. . i will post when i do the conversion !

4fit 01-10-2012 07:29 AM

Quote:

Originally Posted by fdnc2774 (Post 1906548)
thanks man. . i will post when i do the conversion !

Going with the VDP or the Rough Country end caps? Or are you going to reuse the cut portion of the stocker?

Mr. Sinister 01-10-2012 07:32 AM

Quote:

Originally Posted by fdnc2774 (Post 1906547)
nice. . did you drill into yours to hide the wires. . i did. . wasn't to impressed with having to hide wires by zip tie. so i drilled 4 holes. . 2 next to mount and 2 at bottom. . then used black silicone to seal them up

I didn't. I covered the wires in split-loom tubing and zip tied them to the back of the bar. It ended up looking better than I thought it would, so I left it.
I was kind of surprised there were not pre-drilled holes, though.

Barmanvarn 01-10-2012 07:32 AM

Very nice!

I have the vdp ordered but it's on backorder. :(

nkotb 08-21-2013 08:31 PM

I too would like to see this with chopped end caps and a winch... I want to see the chopped look, but I'm not sure there's enough room for most winches??? If you know, please confirm.

Brewbek 08-21-2013 09:40 PM

As far as end caps, does the VDP or Rough Country match the stock finish better? I would like to do this mod, but I don't want the caps to look like caps. I want a factory type finish if I can get it.

By the way, I like the chrome wheels. I like black, but everybody is running them. Just getting a little tired of it. :hide:


All times are GMT -5. The time now is 06:52 AM.