Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Engine swap? (http://www.wranglerforum.com/f218/engine-swap-132492.html)

haroldpo6 01-11-2012 09:31 AM

Engine swap?
 
I have a 95 I6 w/5spd wrangler w/200,000 miles that has some lower end noise, mains i think or piston slap. Anyway i can buy a 96 I6 w/auto out of a grand ck w/86,000 miles for $250 w/out trans. Will this engine be a simple swap? Anything i will need or have to change? Thanks

banks316 01-11-2012 09:39 AM

Use your intake, and header. Plus the acressories from your motor and your good.

Ibuildembig 01-11-2012 09:44 AM

Si senor

haroldpo6 01-11-2012 10:14 AM

Quote:

Originally Posted by banks316 (Post 1910430)
Use your intake, and header. Plus the acressories from your motor and your good.

Which acessories are you talking about?
He said everything comes the the engine except the injectors.
Grand Ck was rolled.

Ibuildembig 01-11-2012 10:18 AM

Basically you need to use the longblock off the GC and everything else off yours. All your brackets, pulleys, etc

haroldpo6 01-11-2012 10:37 AM

Thanks, going up this evening to look @ it.

haroldpo6 01-11-2012 08:12 PM

The engine looks very clean so i got it. After doing some more checking i see the block, head, crank all have different cast numbers than the 95. Does anyone know the difference? I read on one site the head has less flow than a 95. Also a rebuild kit is not the same for a 95. The 96 cost more than a 95.


All times are GMT -5. The time now is 01:50 PM.