I have a 1998 Jeep TJ and noticed that the 4 wheel drive lever is frozen in the off position. The car otherwise shifts through the normal gears no problem. I would appreciate any suggestions. Thanks Carol
01-15-2012 11:00 AM
Make sure that the linkage is connected properly to the transfer case.
01-15-2012 01:05 PM
Hahaha I just had the same problem. Did have a t-case drop installed and removed it? if so that is the problem you need to put it back in to correct the angles of the your linkage.
01-15-2012 01:08 PM
The problem most likely is in the linkage. Need to find the cause and correct it. :)