Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   Pressure gauge (

CaptZZ 11-20-2007 11:01 PM

Pressure gauge
I recently bought an '04 X and sometimes when I fire it up the oil pressure gauge doesn't budge. It'll take three or four starts before it'll finally pop(and the annoying check gauges alarm goes off) and all is well. As this only happens once every two weeks or so I'm confindent there is no issue with the oil pump itself, but sure if I should start dinking the pressure sending unit or start by replacing gauge. Anyone else run across this problem?

AzTJ 11-21-2007 01:39 AM

Its a fairly common thing. Most of the time its the sending unit itself as these motors run a higher pressure than most others. Check the sending unit and make sure that all connections are tight and that its screwed in all the way. If so and the problem persists, replace it. It's a $7 part.

CaptZZ 11-24-2007 10:05 PM

Thanks for the help, still having the issue so I'll look at that.

All times are GMT -5. The time now is 01:14 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.