Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   Need ECM and harness (http://www.wranglerforum.com/f135/need-ecm-and-harness-134467.html)

mcguire6799 01-21-2012 01:29 AM

Need ECM and harness
 
I am needing ECM and engine harness to the ECM for a 92 YJ. 2.5 4cyl, 5-speed transmission with Federal emission. Must be in working condition. Looking for one shipped to 47403.

mcguire6799 01-22-2012 01:45 AM

TTT
Need asap

mcguire6799 01-23-2012 01:33 PM

Need to get my yj up and going bump for parts

jerryj 01-23-2012 08:41 PM

I fried mine and sent it in to the Auto Computer Exchange to be rebuilt the guy there is really cool he couldnt fix mine because it was smashed but he still gave me a trade in, the computer was 160$ or less with trade in not sure on a harness though.Hope this helps

Tim7 01-23-2012 09:37 PM

I have the harness. No computer though.

jerryj 01-23-2012 09:45 PM

and there u have it and you only had to bump twice better get on that wire harness,how much for that Tim??:)

The computer exchange is in Florida if I remember right I found it online and he sent it out the next day..

Ibuildembig 01-23-2012 09:46 PM

I have it all ready to go for less than retail. Sorry if I am too high :(

mcguire6799 01-23-2012 09:50 PM

Mine can't be rebuilt the connector is melted on both sides. How much for it build?

jerryj 01-23-2012 10:01 PM

Its 159.20 with trade in like I said mine was crushed and he still took it.Give them a call the guy was way cool.You give them your vin and miles and they program it to stock the way it came.

I jump my jeep around a bit and some how put a battery bolt through it 3 times he just laughed when he called me and still fixed me up.

mcguire6799 01-23-2012 11:03 PM

You can get new ones for $150...(brand new)

jerryj 01-24-2012 12:26 AM

Thats good the new ones I found local to me were around that and they wanted 70$ to program it with your mileage and to your vin.

mcguire6799 01-24-2012 01:17 AM

Yeah I wish mine could be redone and save me some money but nope=[

mcguire6799 01-25-2012 03:24 PM

Still on the look out for an ECM

mcguire6799 01-28-2012 01:06 PM

Needing these still no one has an ECM and harness?

mcguire6799 01-29-2012 05:37 PM

Anyone, TTT

Buckeyemania 01-30-2012 02:01 PM

I have a ECM. Came out of my 1990 2.5 5spd

mcguire6799 01-30-2012 03:53 PM

Won't work in a 92 sorry. 92-95 is under hood and a little different if my knowledge serves me correct

Buckeyemania 01-30-2012 06:28 PM

Ok Did not know that. Good luck finding one!

mcguire6799 01-30-2012 10:58 PM

Thanks I'll need it haha

idiot magnet 02-01-2012 12:08 AM

Do you know the part number for it?
I might have the ECM that you need.

mcguire6799 02-01-2012 12:56 AM

56027 380(in big bold numbers) are in bottom left of ECM.

mcguire6799 02-03-2012 02:19 AM

Still in need


All times are GMT -5. The time now is 03:45 AM.