New Product - Door Bushing Removal and Installation Tool
Magnitude Engineering is proud to announce its latest product offerings for Wrangler enthusiasts - two new door hinge bushing removal and installation tools
These tools will assist with removing old bushings from your 1976 to 2006 Jeep Wrangler (CJ, YJ, TJ, and LJ designations) or 2007 and newer Jeep Wrangler (JK designation) and will help you install Magnitude Engineering polymer replacement bushings. The blackened steel tool is two-ended. The long larger diameter end is a punch specifically designed to drive out the old bushing using a hammer and serves as a fit check tool prior to inserting the new bushings. The short smaller diameter end is designed with a pilot to lighly drive the bushing into place.
Information on these new tools can be found along with other Magnitude Engineering products at:
|All times are GMT -5. The time now is 12:02 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.