2012 JK Long arm
Full-Traction Suspension 2007-2012 Jeep JK Wrangler Long Arm Kit
Do you drive your JK Wrangler daily? Modifying it doesn't mean that it can't ride better than stock. This system offers hard core rockcrawling performance that rides BETTER than stock. Don't believe the hype about radius arms, the arguments being offered are more confusing than revealing. The factory uses a 4 link configuration for several important reasons. Added strength and safety, reduced binding and bushing wear, and incomparable differences in both on and off road driving performance are the proof of this method. Full-Traction has taken the factory 4 link configuration to its limits by adding arm length and geometry corrections to compensate for height, and performance in critical off road conditions. Fully Bolt-On, no welding or exhaust modification required.
• FTS7330 - 3.0"
• FTS7340 - 4.0"
• FTS7360 - 6.0"
FULLY BOLT ON - NO WELDING
NO LUBRICATION REQUIRED! Maintenance Free
ABSOLUTELY NOISE FREE - SILENT RIDE!
Please note this a redesign of the JK long arm kit. A couple key changes/features
No replacement cross member included. After market HD Cross member will be available
Cross member skid plate included. Attaches to stock cross member
NO EXHAUST MODS REQUIRED
NO GRINDING OF CUTTING on the new Full-traction brackets. Fits without modifications on the 2012
3-4" kits must use 1310 drive shaft
6" kit requires special 1350 drive shafts, available factory direct from us
Kit is works on 07-12 JK's two door and fourdoor
|All times are GMT -5. The time now is 04:24 PM.|