Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   stumbled upon a hp d30... what to do (http://www.wranglerforum.com/f282/stumbled-upon-a-hp-d30-what-to-do-138458.html)

TJe0454 02-08-2012 09:22 PM

stumbled upon a hp d30... what to do
 
im talking to a guy that lives close to me that wants to sell his dana 30 from his xj cheap. it had been in an accident and the mounts are tweaked apparently. i dont know the the housing is bad yet. he said if he cant part it out or sell it, that hes going to bring it to the junkyard to sell. so here are my questions. 1. should i even bother with this axle? obviously im not going to buy it unless it has 3.73 or 4.10s. 2. what should i offer? the nearest junkyard is an hour away, so the gas would probably be more than what its worth.
in regards to the the bent mounts; im going to cut off all of the mounts and weld on 1/4 in ones soon. this will be a project axle.

TJe0454 02-09-2012 10:02 AM

bump

KKhamesi 02-09-2012 11:37 AM

What does the hp stand for?

Green03TJ 02-09-2012 11:41 AM

Quote:

Originally Posted by KKhamesi
What does the hp stand for?

High pinion

KKhamesi 02-09-2012 11:43 AM

Quote:

Originally Posted by Green03TJ

High pinion

Thank you

Badass_TJ 02-09-2012 11:51 AM

I bought my hp dana 30 from a buddy that has a junk yard, the mounts where tweaked, i cut them off and welded on the hd ones....I paid 150$ complete with brakes and steering....

06GoldenEagle 02-09-2012 01:16 PM

hard to find 4.10 or 3.73 HP30s. most are lower ratio unless it came from an olympic edition xj or possibly one other odd model.


All times are GMT -5. The time now is 01:33 AM.