Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Turn signals went out...now my brake lights dont work? (http://www.wranglerforum.com/f210/turn-signals-went-out-now-my-brake-lights-dont-work-14037.html)

Kartik 12-14-2007 02:02 PM

Turn signals went out...now my brake lights dont work?
 
Hi guys. First time poster. So my problem started with the turn signals a day ago. They stopped working completely on both sides. The bulbs are on, they just dont flash and the dash indicator doesnt even show, nor do I hear any clicking sounds. Then today my brake lights went out. I checked all the lights work fine...what could be the problem fuse? if so which one? or bad bulb? but they all work fine? Thanks for all your suggestions in advance.

2005 wrangler, automatic, 6 cylinder.

GrnTJ 12-15-2007 02:22 AM

Have you replaced the bulbs lately with new ones? The guy I bought my Jeep from replaced one of my rear bulbs with the wrong kind of bulb and it threw a bunch of stuff out of wack. Just look to mak sure they are what you need.

dav_stein 12-15-2007 07:02 PM

Does your emergency flashers work? If so this will let you know the flasher is good. If not it could be your flasher relay is bad.

Kartik 12-17-2007 04:50 PM

Quote:

Originally Posted by dav_stein (Post 172263)
Does your emergency flashers work? If so this will let you know the flasher is good. If not it could be your flasher relay is bad.

No. The emergency flashers dont work either, there is no clicking sound at all. Where is this relay located and is it a DIY kind of job or will I have to take it in to a mechanic? Thanks.

PS: I got part of the brake lights to work by replacing the fuse. It only works for the light on the spare tire mount. I replaced the turn signal fuse but that didnt help.


All times are GMT -5. The time now is 02:02 PM.