Jeep Wrangler Forum

Jeep Wrangler Forum (
-   JK General Discussion Forum (
-   -   RR HID Lights on XHD Bumper Hoop (

Punkin Slinger 02-19-2012 06:02 PM

RR HID Lights on XHD Bumper Hoop
I bought a pair of 5" HID lights from RR. They will mount on the hoop on the XHD bumper with their clamps. I don't like the idea of running the wiring externally using tie wraps around the hoop. I would like to drill holes in the back of the hoop next to the clamps and in the bottom mounting flange and the bumper to run the wires inside the hoop. I would then use grommets and silicone sealer to protect the wires and keep water out of the tube. It looks like I would have to cut the ground wires on the lights and splice a longer wire to ground out under the bumper. I'd like to keep the holes as small as possible, but large enough to easily fish wires through. Has anyone here done this? Any problems or recommendations?


stevebanzai 02-19-2012 06:04 PM

Sounds like a good idea. Good luck.

Punkin Slinger 02-21-2012 01:07 PM

Has no one else done this?????

All times are GMT -5. The time now is 01:30 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.