I would ask tom woods how long the driveshaft can safely be. Then jack your jeep off the ground by the rear bumper till the tires are off the ground and measure it. What size lift was the DS made for originally. I had my driveshaft shortened and high speed balanced for 60 bucks, though lengthening costs more.
02-21-2012 10:51 AM
How long is the effective slip section of the drive shaft and how much is exposed right now? A little trig and you can figure it out without picking up the phone.
02-21-2012 01:37 PM
It was based off of a 1.75 budget lift that was sagging a little. I will have to get out and measure it and contact tom woods