I have a 6 speed trans in a 05 wrangler. I do not have the socket to take the drain plug out. It is a big allen wrench type of plug. Does anyone know what size socket I need to get to take the plug out. I think it is a metric size, because I have tried some standard sizes and none fit snug.
02-21-2012 08:55 PM
02-22-2012 01:32 AM
I'm assuming your tranny is a NSG370 then, which means that the drain plug is a #17 allen and the fill plug is a #14 allen. Most AutoZone stores sell a cheap set of these as sockets for 1/2" drivers.