I need this.... BADD
Did you guys see this in the Warn Newsletter today?
This is a must have I need one... Do you guys remember when I severed my Winch Controller cable at the YO a few years ago?
What do you guys think of this hot new toy?
New WARN Wireless Control System for Powersport Winches
Clackamas, OR (1/1/07) - Warn Industries, the leader in aftermarket powersports performance products, has developed a new Wireless Control System to be used with WARN® powersports winches. You spoke, WARN listened. This Wireless Control System is designed from the ground up to suit your needs.
This system allows powersports enthusiasts a convenient and versatile option when winching an ATV or UTV. The Wireless Control System includes an easy-to-use, ergonomically designed, handheld wireless control with two long-life alkaline batteries; a receiver with a built-in antenna for the fastest installation; a handlebar-mounted holster for the handheld remote; and all the wiring and hardware needed for easy installation on an ATV or UTV. This quality wireless control system will fit all current WARN ATV and UTV winches as well as all existing WARN winches equipped with a contactor and mini-rocker switch. It will meet FCC, CE and IC standards, too.
Once installed, operation is a cinch. Simply press both of the handheld's large, easy-to-read buttons for five seconds until the LED turns green, signifying the power is on. To begin winching, hold the appropriate button, the winch will activate and the LED will turn red indicating winching is in progress. If the system remains idle for five minutes, it automatically shuts off to preserve battery life and prevent unintentional operation. If your battery becomes low, the LED will begin to flash red during operation so you know to replace the handheld's batteries. The long-life alkaline batteries are expected to provide years of service for even the most frequent users.
The Wireless Control System will still work under any vehicle voltage level that allows for winch operation.
This Wireless Control System is a great accessory to any WARN powersports winch, and gives enthusiasts more options when the trail gets tough.
About Warn Industries
Warn Industries is the world's most recognized brand in off-road products such as hub locks and vehicle recovery winches. The company designs, manufactures and markets a full line of off-road equipment and accessories that enhance the performance of four-wheel-drive and powersport vehicles. Warn Industries employs more than 600 people in and around Portland, Ore., Livonia, Mich., the Netherlands and Saltillo, Mexico.
For media inquiries, please contact:
Andy Lilienthal, PR Manager
I thought they had wireless controls aready? I know that Ramsey and maybe even Superwinch does.
you are right!
But I have a Warn 9.5Ti and I need one.
I've been real; real; real; real GOOD!
so that control works with all of there winches:confused:
I want that
A friend of mine has his winch wired to a toggle switch inside the cab
Heck, Greg, I am hoping Santa brings just a winch!
Here's a link to making your own for quite a bit cheaper.
The only thing I don't like about those wireless controllers is the lag that you get either pushing or letting go of the button. When you are trying to winch in you need to let go a second or so before you want it to stop. Same if you need to winch in a hurry there is a bit of a lag from when you push the button to when the winch begins.
Not that it would detract me from buying one, but if you grab a guys wireless controller on the trail and are trying to wind up the winch and it keeps going after you release the button it's kind of odd at first. :D
|All times are GMT -5. The time now is 12:22 PM.|