Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   MO: My garage grows TJ parts! (http://www.wranglerforum.com/f135/my-garage-grows-tj-parts-141701.html)

Kevbz 02-23-2012 11:40 AM

My garage grows TJ parts!
 
Every time I think I have cleaned house I find more, now only if it would grow a tub for me!

I have a Agate glovebox, complete. I cleaned it up with some armor-all wipes and looks good, I'd say average to above average color, no broken tabs on the bottom, no drill holes or gouges in it. Got it as part of a package deal for a console but I have a tan interior. NO key to the lock but I played around with it and it looks like you can unmount your handle and key area and bolt it onto this one so you stay keyed alike, or use this one as is, its not locked at the moment. Say 25.00+ actual shipping


Perfect working factory fog light switch, out of a 99, should fit factory 97-02 switch area, not sure if anything changed of 03-06. 20.00+ shipping (should be cheap in a bubble mailer)

still have 1/2 of a hood latch, the hood side, brand new, only used the bungee side for my jeep. Needs one common nut, reuse yours or hardware store easy find. 5.00 + shipping in bubble envelope

backing plates for a Dana 35/44 rear drums. came off my dana 35 before I scraped it, good condition, I'll try to clean them up a bit (brake dust and grime on them) 10.00 for both + shipping

passenger e-brake cable, another survivor from my d35 swap, 10.00 + shipping

stock lower control arms, were given to me free for my axle swap encase i boogered mine up, all went well and no need. Not sure how to rate the bushings, look ok but has some cracking in the rubber, not loose in the arms or anything. FREE + shipping, about 15.00 is what it cost me

I made a CB antenna bracket, I made two and this one is an extra. I've marked the holes and you can drill it as you see fit. Worked on my TJ and can be mounted behind the drivers or passenger side taillight for the ground, raw metal, paint-able (dont paint the flat plate as that will screw up your ground, just the tab sticking out needs to be painted. 10.00 shipped.

Midland CB 1001Z, with mic and mounting bracket, and mic bracket. Power and ground wires are 6" pigtails, add your own length of ground and power with a inline fuse. 10.00 + shipping. I can add the wires for you (crimped, soldered and heat shrinked, with fuse) for an additional 5.00

I'll do a combo deal on the CB , mount and extra wires, shoot me an offer and we can save on shipping.

(CB was another one of those package deals off craigslist that got me more than what I needed.)

Nothing is of great weight and should ship cheaply. I've shipped alot of items this small and they all seem to fall into the 3-7 dollar range. The only way to accurately get you a shipping weight is to box it up and go to the post office.

I never try to make money on shipping (on here, ebay, craigslist etc.), but its to hard to box it up, drive to the post office, get a quote, email about it then have someone say not interested...only to do it over again. So if you intend to buy, knowing that shipping can fall into that 3-7 range, i'll box it up and get it out to you with an accurate cost to ship. Please be serious about it so I don't run to post office for nothing! :flowers:

NOMUGGLE 02-23-2012 12:47 PM

I would like to purchase the antenna mount. Do you acceprt Paypal?

Kevbz 02-23-2012 02:51 PM

I do take paypal. currently there is two interested in the CB and you are interested in the mount. Let me make sure they are not after the mount also, no one mentioned it but dont want to sell it and screw something up here.

NOMUGGLE 02-23-2012 03:02 PM

Thanks, let me know

jstone326 02-23-2012 06:41 PM

When you say Lower Control Arms, do you have front and back? Or just one?

teamhirev 02-23-2012 09:23 PM

how much for the switch

Kevbz 02-23-2012 10:34 PM

Quote:

Originally Posted by jstone326 (Post 2067393)
When you say Lower Control Arms, do you have front and back? Or just one?

i have the lower control arms (two total). They fit the front or rear on TJ's. one set for the front or back

Kevbz 02-23-2012 10:34 PM

Quote:

Originally Posted by teamhirev (Post 2068146)
how much for the switch

20.00 + shipping

Kevbz 02-23-2012 10:35 PM

Quote:

Originally Posted by NOMUGGLE (Post 2066705)
Thanks, let me know

mount is available if you want it

NOMUGGLE 02-24-2012 10:47 AM

I will take it, let me know how much it is with shipping and I will send you money via Paypal

Jeepneck 02-24-2012 12:42 PM

I'm interested in the glovebox if still available

Kevbz 02-24-2012 12:52 PM

Quote:

Originally Posted by NOMUGGLE
I will take it, let me know how much it is with shipping and I will send you money via Paypal

Ten shipped

paypal is kevbz75@gmail.com

Kevbz 02-24-2012 12:53 PM

Quote:

Originally Posted by Jeepneck
I'm interested in the glovebox if still available

It is still available if you want it

Kevbz 02-24-2012 12:56 PM

Cb and control arms are gone

Antenna mount and glove box have interest in them

Fog light switch and hood latch is available

NOMUGGLE 02-24-2012 01:23 PM

Quote:

Originally Posted by Kevbz (Post 2070025)
Ten shipped

paypal is kevbz75@gmail.com


Just made the payment through Paypal. Please let me know if I need to do anything else.
Thanks.

Kevbz 02-24-2012 01:47 PM

Quote:

Originally Posted by NOMUGGLE

Just made the payment through Paypal. Please let me know if I need to do anything else.
Thanks.

Got it on my end with your address. Will ship ASAP. Did you want me to leave it undrilled? You'll need a 1/4" bit for the mount holes and a 1/2" bit for the antenna hole if you do it.

NOMUGGLE 02-24-2012 03:48 PM

Quote:

Originally Posted by Kevbz (Post 2070194)
Got it on my end with your address. Will ship ASAP. Did you want me to leave it undrilled? You'll need a 1/4" bit for the mount holes and a 1/2" bit for the antenna hole if you do it.

Yes, Please leave it undrilled, I will take care of it on this end
Thanks.

Kevbz 02-24-2012 04:42 PM

Quote:

Originally Posted by NOMUGGLE (Post 2070546)
Yes, Please leave it undrilled, I will take care of it on this end
Thanks.

oops... I went a head and drilled it to ensure the top tab was level when mounted...but didn't drill the antenna part.

Jeepneck 02-24-2012 11:09 PM

I'll take the glovebox. Let me know about cost and how to send payment. Thank you

Kevbz 02-25-2012 08:50 AM

Quote:

Originally Posted by Jeepneck
I'll take the glovebox. Let me know about cost and how to send payment. Thank you

I'll get in in a box and weight it. What's your zip?

Kevbz 02-25-2012 11:41 AM

Quote:

Originally Posted by NOMUGGLE (Post 2070546)
Yes, Please leave it undrilled, I will take care of it on this end
Thanks.

shipped last night

Kevbz 02-26-2012 03:31 PM

glovebox is pending

backing plates, Fog light switch, e brake cable, half a hood latch are whats left

eagle223 03-21-2012 06:24 PM

Fog light switch still available? And how much shipped to 94526?

Kevbz 03-21-2012 06:27 PM

Quote:

Originally Posted by eagle223 (Post 2166086)
Fog light switch still available? And how much shipped to 94526?

23.00 get you the switch and pays for shipping

johnwp2001 03-22-2012 06:59 AM

If you still have the fog light switch how much is it shipped to zip 39740?

Kevbz 03-22-2012 07:35 AM

fog light switch is sold

Kevbz 03-22-2012 07:35 AM

only remaining items are the hood side 1/2 hood latch

the two backing plates for rear drums,

and the passenger ebrake cable


All times are GMT -5. The time now is 03:11 AM.