Hey guys, first post here. I just bought an 01 wrangler with the 4.0 and it has had the standard pulled and replaced with an auto. I have a check engine light on and dont remember exact code it is throwing but it has something to do with it not knowing what gear it is in. Also the the reverse lights do not work. I found two plugs on the drivers side disconnected near where the shift linkage connects to the trans. Any help would be sweet. Can't get an inspection sticker like this!
02-23-2012 01:44 PM
when the transmissions were swapped were the computers also swapped?
02-23-2012 01:48 PM
The two plugs issue is easy 1 goes on the tranny for the backup lights and the other goes on the transfer case for the 4x4 light on the dash. On a standard the switches are both on the drivers side. I don't know about the auto tranny issue.
02-23-2012 02:09 PM
i accidentally made a knew post in this same forum. thought i lost everything trying to post pics. whoops well anyway i have pics on the other one. if a site moderator would like to delete this post pleas do.