Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Front end (http://www.wranglerforum.com/f218/front-end-142206.html)

JeepYJBoy 02-25-2012 03:54 PM

Front end
 
I have a 1990 yj and all of sudden when I put it in 4 lo and turn it makes a loud clinking noise

Jeep716 02-25-2012 05:49 PM

Have it checked. Could be a lot of things like u joints ,dirty actuator , slop on transfer case chain even worn mounts.

4Jeepn 02-25-2012 09:52 PM

Are you on drive pavement? I will guess axle shaft u-joint.

JeepYJBoy 02-25-2012 10:50 PM

Quote:

Originally Posted by 4Jeepn
Are you on drive pavement? I will guess axle shaft u-joint.

Nope....just replaced them and all new yokes and pinion seals

kmanator 02-25-2012 11:08 PM

wheel loose....bad u joints in propeller shaft.....bad ball joint....gravel in your hubcap...Techno music on your stereo.....your dog swallowed marbles...:banghead:

Square_Eyes 02-25-2012 11:24 PM

Is it just when you turn the wheel while not moving or are you moving and turning? Dry pavement or dirt? spring under or over? Lift? Check your drag link and tie rod for play in the joints

JeepYJBoy 02-27-2012 08:34 PM

Quote:

Originally Posted by Square_Eyes
Is it just when you turn the wheel while not moving or are you moving and turning? Dry pavement or dirt? spring under or over? Lift? Check your drag link and tie rod for play in the joints

It's when moving and turning on dirt all stock what do you mean by "play"


All times are GMT -5. The time now is 08:03 PM.