Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   axle lock problem on 04 rubicon (http://www.wranglerforum.com/f282/axle-lock-problem-on-04-rubicon-142261.html)

Larry Rasco 02-25-2012 08:19 PM

axle lock problem on 04 rubicon
 
i need a electrical diagram on lockers ofr my new to me rubicon. the light in the dash for 4 wheel drive does not work and no axle lock new to jeep and fourm any help

Kevbz 02-25-2012 10:08 PM

I believe there is a sending unit on top of the transfer safe that goes bad for the 4wd light. Simply swap for a new one. Not sure on the axle lock

Kevbz 02-25-2012 10:08 PM

Quote:

Originally Posted by Larry Rasco
i need a electrical diagram on lockers ofr my new to me rubicon. the light in the dash for 4 wheel drive does not work and no axle lock new to jeep and fourm any help

What year?

Barrie 02-25-2012 10:14 PM

Right in the thread title, 04. :thumb:

Kevbz 02-25-2012 10:19 PM

Quote:

Originally Posted by Barrie
Right in the thread title, 04. :thumb:

Is that what that is? Lol

darkproximity 02-25-2012 10:25 PM

the switch probably isnt bad, just needs cleaned.. all it is basically is a ball bearing that gets pushed up and completes a circuit which turns the light on..

Kevbz 02-25-2012 10:29 PM

2004 Wiring diagram

https://docs.google.com/open?id=0B7_...ZFhnMmNEOTAzUQ

page 37

Jason1348 02-25-2012 10:30 PM

Mine had a loose wire on the front pumpkin fix light works gray now

Kevbz 02-25-2012 10:36 PM

Quote:

Originally Posted by darkproximity (Post 2075011)
the switch probably isnt bad, just needs cleaned.. all it is basically is a ball bearing that gets pushed up and completes a circuit which turns the light on..

may have to play with that this weekend

darkproximity 02-25-2012 11:05 PM

if you take it out, clean it and plug it back in you can easily test it by pushing it with your thumb.. have someone look in the jeep and see if the lights coming on

Larry Rasco 02-26-2012 08:55 AM

Thanks for the wiring digram should help a lot

Kevbz 02-26-2012 10:32 AM

no problem...nice lil piece of paper to have!


All times are GMT -5. The time now is 07:45 PM.