Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Heater / AC control knobs (

jherrin215 12-22-2007 06:13 PM

Heater / AC control knobs
Just wondering where I could find the part #'s for the heater and AC control knobs for my '03. I have 2 that are broken. 1 still works and the other I have to use a pair of needle nose pliers. I found them on jeepsrus but they wanted 10 bucks to ship them. I figured I may be able to go to the local ford dealer and get them for about 15 with no shipping. Thanks!!

n8smitty 12-22-2007 11:16 PM

Yeah I need those #'s too. I broke one of mine and have to change the temp with pliers. I also need the part # for the relay switch for the fan. I only have high on my ac/heater fan.:(

Scoob 12-23-2007 12:43 AM

Even if you can get them, I dont it would be any cheaper from a stealership.

The parts breakdown for my 06 shows it to be all one piece for the control panel and the knobs. Meaning you cant order them seperate.

Might have better luck at a junkyard.

jherrin215 12-23-2007 01:07 AM

Well that sucks!! Thanks scoob!! I went looking for the flat bumper caps and people were asking like 40 bucks a set for them. I got them at the dealership for 2 something each, so a lil over 8 bucks. I heard that you can get these at the dealership for like 7 each, but I just said forget it and ordered them from jeepsrus. I got 2 of those and one of those big bolts that goes through the soft top door surround into the rollbar for 24 bucks shipped, not too bad.

compshooter 12-23-2007 01:09 AM

I had to get one also awhile backs. Dealership was less than 10 bucks for it. For once it actually made sense to go there. Give them a call and get the price. You might be surprised.

Walkeraviator 12-23-2007 08:02 AM

i know with my old Grand Prix, i could never find part numbers for teh Hvac knobs... but went to the dealership and they sold em seperately at $7 a piece.

Triple88a 12-23-2007 11:46 AM

compshooter i love your legs :p jk

compshooter 12-24-2007 01:29 AM

Thanks....they keep my but from looking fat. :rolleyes:

Walkeraviator 12-24-2007 06:33 AM

dude... why not get the billet aluminum ones from Q-tec???

jherrin215 12-24-2007 10:37 AM

because everything else inside is stock and I think it would look silly to have 3 big shiny knobs in the center of my dash.

n8smitty 12-27-2007 10:16 AM

Well my Mother-in-law got me the billet knobs for xmas. They should hold up better than the factory ones and I like the red light dot on them in the dark. Rednecks and shiney things..:rofl: I also got the fan relay switch from the dealership and installed it myself. Took about 30 mins to remove the old one and 10 mins to install the new one. You have to stand on your head and use 3 arms to remove the screws. But now I can turn all the knobs without pliers and my fan works on all 4 settings.

robertv 12-27-2007 10:47 AM

this is where i got mine, hope this helps.

jherrin215 12-27-2007 05:03 PM

Thanks robert, yeah it helps, it has the part # on it. I have already ordered some but I am sure it will come in handy for someone!! Thanks again!!

Jimbo 12-31-2007 09:18 AM

Helped me!! Ive been looking everywhere for these... 2 are broken.

On a similar note....Anyone have the part number for the center dash A/C vents? those are busted too....

All times are GMT -5. The time now is 07:35 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.