Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   My dash ABS light is flickering... and I don't have ABS (http://www.wranglerforum.com/f282/my-dash-abs-light-is-flickering-and-i-dont-have-abs-143269.html)

jstone326 02-29-2012 11:33 PM

My dash ABS light is flickering... and I don't have ABS
 
So I just noticed today that my ABS light was flickering. I've never seen the light before since I don't have ABS.

Any ideas as to why this might be happening?

thanks

obidya 03-01-2012 10:09 AM

have you recently done any gauge modifications, like adding LEDs?

jstone326 03-01-2012 10:22 AM

Quote:

Originally Posted by obidya (Post 2090802)
have you recently done any gauge modifications, like adding LEDs?

no, i haven't

obidya 03-01-2012 10:45 AM

thats really weird... I don't have ABS and that socket is blank in mine.

jstone326 03-01-2012 03:06 PM

Quote:

Originally Posted by obidya (Post 2090888)
thats really weird... I don't have ABS and that socket is blank in mine.

Yeah I know its weird haha... It wasn't doing it today, but def was last night

Green LJRub 03-01-2012 08:34 PM

The brake light would come on on my Subaru if the fluid was low. Im not sure if a Jeep has the same kind of sensor on it, but its worth a check.

jstone326 03-01-2012 09:48 PM

Quote:

Originally Posted by Green LJRub (Post 2092517)
The brake light would come on on my Subaru if the fluid was low. Im not sure if a Jeep has the same kind of sensor on it, but its worth a check.

I guess it never hurts to check my fluids, but the thing is the light wasn't on, it was just flickering... and then it stopped

I'm not at all worried about it, just curious

Feed_That_Jones 03-01-2012 09:50 PM

My 06 did that one time while driving it home after i had it jumped off when the battery crapped out.

jstone326 03-01-2012 09:53 PM

Really the only thing that I can think of that has changed that could possibly have an effect is this... I recently installed windshield lights, and removed the cowl to do so. To put the cowl back on, I pulled off the weather stripping at the front of the cowl, but put it back on. It is possible that it isn't on properly and some water dripped down onto some wires or the computer... I say this because it happened during the first real rain we had since I installed the lights


All times are GMT -5. The time now is 03:52 AM.