Jeep Wrangler Forum

Jeep Wrangler Forum (
-   JK General Discussion Forum (
-   -   automatic windows 2012 jku (

GiantSchnauzer 03-01-2012 01:08 PM

automatic windows 2012 jku
Dropped of my jeep to get the windows tinted and the guy calls me a bit later saying that they cannot get the passanger side window to go down. I figure they got the child lock on etc.. and to use the front panel. Well i get there and every window workes but that one. I check the fuses in the engine bay as well as the power connector for the door in the frame but nada.was working perfectly unitl now, Any ideas? cant afford to drop my jeep of at the dealer to check it out due to work/time issues. :confused:

4fit 03-01-2012 01:12 PM

Check the door harness. It may have come unplugged for some reason. Does the power lock with from that door? If not, it is most likely the door harness.

GiantSchnauzer 03-01-2012 01:19 PM

power harness is what i meant with the power connector , soz for wrong terminology, been a long day, but thnx for quick help :)

GiantSchnauzer 03-01-2012 01:21 PM

and good point, just checked, yes the door locks/unlocks with the rest of the doors :(

4fit 03-01-2012 01:24 PM


Originally Posted by GiantSchnauzer (Post 2091308)
and good point, just checked, yes the door locks/unlocks with the rest of the doors :(

hhmm.....sounds like you may need to make a trip to the dealer unfortunately.

daggo66 03-01-2012 01:24 PM

It's most likely the switch or the regulator. The dealer is your best option.

GiantSchnauzer 03-01-2012 01:33 PM

prob the regulator as both front and rear switches get no response, i guarantee they wont have the part in stock. well, on the good side if thats my only prob with the jeep so far after 6000km i should be happy, just wished it broke after the tint as i have to get that window redone propery when its working and time is a luxury

All times are GMT -5. The time now is 08:04 AM.