i have a 01 wrangler sport and my heat/a/c blower only blew on the low setting. i changed the switch and it worked for a couple of days and stopped working completely. i changed the switch,resistor and blow motor and still nothing. what would cause this?
03-08-2012 09:08 PM
Im having the same problem, well for the most part. My blower only works on 1 2 and 4. I changed the motor and the switch, still the same.
03-09-2012 05:43 PM
Ok I found my problem. The small plug to the right of the defrost,floor,vent and ac selector was melted so I cleaned it up and plugged it back in and it works fine now.
03-10-2012 10:02 PM
I may have to check that out. Thank you for the info.