I'm helping my buddy lift his 2012 Rubi, and I need to know if they make a kit to lower the trans/t-case to correct the driveshaft angle. Anyone have experience with this? Are the JK's designed differently and therefore don't need this kit?
03-09-2012 08:25 PM
Don't need it. What size/type/brand lift y'all installing?
03-09-2012 08:50 PM
That needed to be addresses on the Tj
Other ways to adjust axle/pinion angles on the JK. Stay under 2.5 and you should be OK :)
03-09-2012 09:07 PM
On the JK, you adjust the angles with brackets or adjustable control arms that should be in the kit if the lift is higher than about 2.5".