Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Control Arms (http://www.wranglerforum.com/f282/control-arms-14645.html)

tazmann910 01-09-2008 08:59 AM

Control Arms
 
OK, so I am wanting to buy all new control arms, I cannot seem to find a place that sells only control arms. Can someone please offer up a place to buy them and recommend a brand.

Thanks

jeeperman 01-09-2008 09:19 AM

JKS makes good stuff, here is a link to their site: JKS

tazmann910 01-09-2008 10:12 AM

I have seen those before, I just need to find someone who sells them.

I guess I can check their dealer locator on their site.

Quote:

Originally Posted by jeeperman (Post 180193)
JKS makes good stuff, here is a link to their site: JKS


mrbigjeep 01-09-2008 10:13 AM

http://www.dpgoffroad.com/

under "products", click "suspension" and then click the JKS box...then scroll down.

tazmann910 01-09-2008 10:19 AM

If my math is correct, that would cost me $1100 to replace the control arms. Seems a bit high.

Quote:

Originally Posted by mrbigjeep (Post 180201)
http://www.dpgoffroad.com/

under "products", click "suspension" and then click the JKS box...then scroll down.


dave@rokmen 01-09-2008 10:25 AM

You could also try www.rokmen.com... :)

They make their own HD control Arms, and sell JKS as well...

http://www.rokmen.com/images/lower_ca_1.JPG

http://www.rokmen.com/images/oursvsstock_arms.JPG


And JKS here:
http://www.rokmen.com/products/suspe...trol_arms.html

Maybe I'm Biased..... ;)

Scout 01-09-2008 10:33 AM

4Point just installed some Rokmen CA's and seems really pleased with them. Maybe he'll chme in too. All I've seen are pictures but from what I see they look like pure BEEF. :D

tazmann910 01-09-2008 12:11 PM

Dave -
Where can I find pricing on the Rokmen CA's?

Quote:

Originally Posted by dave@rokmen (Post 180206)
You could also try www.rokmen.com... :)

They make their own HD control Arms, and sell JKS as well...

http://www.rokmen.com/images/lower_ca_1.JPG

http://www.rokmen.com/images/oursvsstock_arms.JPG


And JKS here:
http://www.rokmen.com/products/suspe...trol_arms.html

Maybe I'm Biased..... ;)


dave@rokmen 01-09-2008 12:45 PM

Go to the front page, and click on the picture of the control arms.

www.rokmen.com

4point 01-09-2008 03:48 PM

I just installed mine last weekend. I immediatly noticed a difference in handleing. Its nowhere near as rigid as before. I will be going on the Winter Fest run in NorCal this weekend, I'll let you all know about the off-road handeling. I'm sure they will be as much if not more of an improvement off-raod.
I met Jeff and Dave at a run in Vegas this last fall, they had their products laid out at a booth. I really didn't know anyone else at the event so I hung out at their (mabey a little too long :D ) booth. These guys were great, their quality is extermely high and and are concerned about keeping it that way.

AzTJ 01-09-2008 04:24 PM

FYI - The ROKMEN arms are just the lowers. If your looking to replace all 8, you'll need a set of uppers, preferably adjustable as well.

tazmann910 01-10-2008 05:11 PM

Any suggestions?

Quote:

Originally Posted by AzTJ (Post 180308)
FYI - The ROKMEN arms are just the lowers. If your looking to replace all 8, you'll need a set of uppers, preferably adjustable as well.


nicolas-eric 01-10-2008 05:20 PM

all my friends have currie CAs with johnny joints.
http://www.currieenterprises.com/ces...t.aspx?id=1199

i wil buy them next time i have enough money.

Joe Dirt 01-10-2008 05:43 PM

I just bought some from Rusty's Offroad www.rusty'soffroad.com

nicolas-eric 01-10-2008 05:47 PM

how are the rusty´s CAs?
a buddy told me that the thread will wear out during heavy offroad use without the rustys locking jam nuts.

silvergoat 01-10-2008 06:40 PM

Heres a link to TnTcustoms control arms. This is what I run, they flex great.

http://www.tntcustoms.com/webv5/replacementarms.asp


All times are GMT -5. The time now is 11:00 AM.