Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   door help (

cntryboy232 03-15-2012 08:17 PM

door help
Im new to the whole wrangler thing and well its going to be 50-60 this weekend and i want to take my doors off. i took the 2 bolts and each side and tried to get doors and and basically was shaking the jeep. I even took a dead blow hammer to do it. im doing something wrong to get them off. I think they might never been off before and its 100,000 on an 05 unlmited. I was thinking all wrangler doors can come off but maybe im wrong. If there is something i need to do to get them off id like to know. i sprayed wd-40 on the pins.

02Prove 03-15-2012 08:19 PM

Work them back and forth while applying up pressure... They'll eventually give. The first time is always the hardest.

jp2611 03-15-2012 08:22 PM

patience...... swing the door back and forth and lift, it is a common problem for the ones that haven't been apart before, i have heard of a block of wood and jack being used but never had to try that with my TJ....GOOD LUCK!!

cntryboy232 03-15-2012 09:24 PM

thanks for the advice. ill try it tomorrow after work. With the doors off it kills the gas milage with hard top on?

Hammerdown 03-15-2012 09:34 PM

Once you take off the nuts, there is NOTHING to hold down the door. Hit with abundance.

All times are GMT -5. The time now is 02:44 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.