Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   No Back-up Lights (http://www.wranglerforum.com/f282/no-back-up-lights-146981.html)

Crown King 03-17-2012 05:53 PM

No Back-up Lights
 
My back-up lights are out. Have been for a couple of years. Nobody said anything in AZ (no inspection required), but I guess it's a HUGE deal in PA. Go figure! Anyhow, lights are good, fuses all good. Pulled shifter indicater plate, no switches, etc...Sprayed some silicon lube on everything and put it back together.

Any ideas on where to start next? '04 X, 4.0, Auto. Thanks!!

Wheel2Work 03-17-2012 11:56 PM

Drivers side of the transmission... Change this switch Jeep Wrangler Reverse Light Switch - AM Autoparts

JKirtlink 03-18-2012 09:48 AM

Reverse indicator switch was faulty on my '04 Sport 5 Speed when I had the same problem. Bought the switch for under $20, and within 20 minutes I had pulled the old one out (drivers side of transmission housing) and put the new one in.

Now it passes inspection! Good Luck!

burton160w 03-18-2012 06:47 PM

That's the plug for manual transmissions, his is an automatic.

Crown King 03-18-2012 07:50 PM

Thanks Burton160W. Thanks to others also, but as noted, AUTO Trans. Similar switch on auto? Anyone? Thanks...

Wheel2Work 03-18-2012 11:13 PM

Sorry about that. After looking a little harder, I found that the 42RLE position sensor is part of the valve body assy. MOPAR P/N 4659676AB. This is a good drawing for the trans:

http://www.detranscatalog.com/wp-con...1/04/42RLE.pdf

burton160w 03-18-2012 11:20 PM

Quote:

Originally Posted by Wheel2Work (Post 2154799)
Sorry about that. After looking a little harder, I found that the 42RLE position sensor is part of the valve body assy. MOPAR P/N 4659676AB. This is a good drawing for the trans:

http://www.detranscatalog.com/wp-con...1/04/42RLE.pdf

Good call, I tried looking but couldn't find the info on it. :punk:

Crown King 03-19-2012 10:35 AM

Awesome info!! Thanks Wheel2Work!


All times are GMT -5. The time now is 03:52 PM.