Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Stock JKU Front Bumper Hoop (http://www.wranglerforum.com/f274/stock-jku-front-bumper-hoop-148158.html)

Alpinejku 03-22-2012 02:13 PM

Stock JKU Front Bumper Hoop
 
Have had NO luck finding a front bumper hoop for a stock front bumper.
Does anyone know a company that makes such a part.

Thanks,
Don

MTH 03-22-2012 02:17 PM

Like mine?

http://cdn.wranglerforum.com/attachm...2&d=1323275675

Alpinejku 03-22-2012 02:23 PM

EXACTLY.
Where did you get it.
Thanks

kjeeper10 03-22-2012 02:25 PM

2 Attachment(s)
Or mine :)

MBRP... A bit more pricey than mikes :(

4fit 03-22-2012 02:27 PM

Rugged Ridge, Mopar, and Olympic all make one similar to Mike's (which I believe is the Rugged Ridge model). Then there is the MBRP bar like kjeeper is running,
http://cdn.wranglerforum.com/attachm...1&d=1330905149

On edit: posts move fast around here! :rofl:

MTH 03-22-2012 02:30 PM

Quote:

Originally Posted by Alpinejku (Post 2169305)
EXACTLY.
Where did you get it.
Thanks

Here's my bumper explanation from another thread. Let me know if any of the links don't work for you.

Quote:

Originally Posted by MTH (Post 2087572)

I get quite a few questions about this set up. It's this Rugged Ridge light bar. I cut the light brackets off with a sawzall and used an angle grinder to smooth out the cuts. Then I bedlined over the exposed metal with spray-on Rustoleum bedliner. Install wasn't bad, though your fingers need to get to some narrow spots.

I will say that the steel on the light brackets is no joke. I mounted the light bar first and then used a sawzall, and the sawing definitely worked the mounting hardward pretty hard (though it's still rock solid). If I had it to do again, I'd consider cutting the tabs before mounting if you've got a bench mounted vice.

It's also this shorty bumper cap set as well as this skid plate. It appears that Elevated may not be making the skid anymore, though threre are quite obviously many like it with a similar minimalist look.

Beyond all that, it's a stock bumper, though in the interest of full disclosure I should also note that I bedlined the "Jeep" logo and added this grille mesh.


kjeeper10 03-22-2012 02:35 PM

Quote:

Originally Posted by 4fit
Rugged Ridge, Mopar, and Olympic all make one similar to Mike's (which I believe is the Rugged Ridge model). Then there is the MBRP bar like kjeeper is running,

On edit: posts move fast around here! :rofl:

Like lightning :thumb:


All times are GMT -5. The time now is 10:37 AM.