Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   bumper bolts (http://www.wranglerforum.com/f218/bumper-bolts-148167.html)

Jaydogg25 03-22-2012 04:00 PM

bumper bolts
 
bought a SB winch plate. was installing it today and the bolts that came w/ it sort of thread into frame, didn't tighten down. looks like the factory bolts (t-55) are correct ones. i called dealership and they are no-longer around. so was wondering what size they are. from what i have read while searching looks like 1/2 - 13 is this correct?

also rear bumper has a couple locations for bolts underneath. was wanting to install them. i have seen them going from 7/16-14 to 3/8-13 didnt know which was correct..

thanks for help

scotbro 03-22-2012 05:02 PM

1/2-13 is the correct size for the front bolts. I just changed all of mine. I also used some anti-sieze and the new bolts went in much smoother.

Jaydogg25 03-22-2012 05:10 PM

ok thanks. now just have to figure out the rear ones.. but @ least can finish up my winch plate install


All times are GMT -5. The time now is 11:48 AM.